Most projectors come with speakers that are very hard to hear. And because the speakers in them are so light, projectors need to be set up with speakers.
Because the big screen needs more sound so that you can watch movies, dramas, and other shows from the comfort of your own home.
You might have trouble putting speakers in a projector, and even if you do, you might not hear any sound.
So you shouldn’t worry. Getting speakers to work with a projector is pretty easy. We’ll tell you some easy things to do.
By using these tips, you’ll be able to connect speakers to a projector so you can watch movies and shows.
To connect the projector to the speakers, you may need some extra equipment. Here’s a simple way to do it. So that you don’t waste time and can watch movies and dramas.
Set the projector up
After you’ve put together everything you need, put the projector and speakers in the best spot where you won’t have trouble getting up, sitting down, or walking.
You decide where your projector and speakers will work best and set them up there. Now, measure the wires that go from the projector to the speakers. And if you need to, add more cable. You can also hide the wires that connect the speakers.
Pick the Best Cable
You just need to be more careful about who you help and how you help them. In this case, you will need the best cord to connect the speakers to the projector first.
Every piece of electrical equipment needs a wire, and if you choose the right cable, you can avoid a short circuit. That’s why we’re telling you to choose the right wire.
Stop the projector and the speakers.
You want to connect the speakers to the projector, so we will ask you to take the projector and speaker wire out of the electric plug.
This process will keep both you and your equipment safe. Again, you can see that the projector and speakers are turned off. This step is important. Even if you have everything you need.
Find the headphone jack.
Now you need to find the audio out jack on your projector. It also has a label so you can find it quickly. Every projector is set up in a different way.
But most audio out jacks are the same as the other In/Out Jacks. Like an electrical plug. Maybe your power jack is also the audio out jack.
Put the cable for the speakers into the projector.
Now that you have the audio output jack, connect the wires of your 7.1 home theater system or projector sound speakers to the audio output jack.
If your Projector is mounted on the ceiling, you must carefully lower it to connect the wires from the speakers to it.
But make sure you take the Projector and speakers out of the power plug before you drop the Projector and connect the speakers to it.
Test the sound signal by turning on the projector and speakers.
After you connect the speakers to the projector, you can move the projector and the speakers to a different spot. Now you have to plug in the projector and the speakers.
Make sure you connect the wires of the speaker to the right audio out plug. And it is put together well so that the plug for the audio out is not loose.
Now that everything has been checked, you can check the sound of any movie, song, or drama. Your speakers should now have sound, and you should be able to watch TV, watch movies, listen to music, or play games with a big screen and loud sound.
Troubleshooting
If the speakers don’t make a sound even after being connected to the projector. Instead of the speakers, the sound comes from the projector.
If the sound is coming from the projector speaker, the external speakers are not connected to the projector.
Then you have to take another look at the most common mistakes. You should check to see if both the speakers and the projector work. You can use your phone, a DVD player, or a TV to test the speakers to see if the sound is right.
If your speakers are far from the projector or if there are more than 2 speakers in your room. You should also check the wires carefully to make sure the connection isn’t broken anywhere, especially if you have a 7.1 home theater system or projector speakers.
To move the wires from one place to another, you might have to push on them. Or, the wires may be broken where you and your family have a long way to go. To well hide the wires and set them up. Check again to see if the audio cord is connected to the Projector and speakers in the right way.
Also, check to see if the speaker wire is plugged into the Projector’s audio out jack. The Projector has the same viewer because of the plug-in. There are also more than one jacks for audio. This makes it easier to make mistakes. So you can test the speaker’s jack by plugging it into different audio out jacks.
You should check your Projector’s audio output jack to see if it sounds bad. And check the jack on the speaker by plugging it into something else. Check the plugs carefully to see if they fit. If the plug doesn’t fit right, it won’t work.
This might make it hard to move the sound to the speakers. If you’ve tried everything we’ve told you and the sound still doesn’t come from the external speakers. You have to show the mechanic the Projector. Get in touch with your maker or seller.
How to wirelessly link a projector to speakers
You are sick of having wires all over the place, or you use your projector in different places. You don’t want to use cables, so you want to connect wireless speakers to a projector.
Very few projectors have a wireless system built in. You are tired of wires, and in this modern age, you will want your projector to connect to wireless speakers. So we’ll show you how to run the projector and speakers without wires.
This method is more comfortable than the others, and it will also save you time, so you can start watching TV shows and movies faster.
Have a wireless projector
First, make sure that your speakers and projector have a wireless system. If not, you will need a Bluetooth transmitter that works over the air.
With this transmitter, you can get your speakers to connect via Bluetooth. Then you can use the Projector to send sound to speakers.
Set up Bluetooth
First, make sure that your wireless Bluetooth speakers work well with Bluetooth. So the first thing you need to do is connect your Bluetooth speakers to your phone and listen to its sound. Connect the Bluetooth transmitter that works wirelessly to your projector.
In this way, you don’t have to do much. There is important information that says you have to keep the projector and speakers far enough apart so that the sound isn’t bad when you watch movies, watch TV shows, or listen to music.
So, after you put the Bluetooth transmitter in the projector, move the speaker or projector closer to the projector. When you’re done, you can look around.
When the speakers and the projector are connected, play the sound and put the projector or speakers where they belong. It will show you how far away you can put speakers and projectors.
Troubleshooting
If you can’t hear the wireless, check to see if the speakers and Projector are set up right.
If the speakers and projector are connected correctly, the problem may be with the Bluetooth transmitter. Take off the transmitter and hook up the speakers again.
When you browse, you should make sure you are using the right name. Most of the time, this problem can be fixed by resetting the Bluetooth transmitter.
How to hook up a projector to speakers when it doesn’t have an audio output
You might not have an audio output jack on your projector, or if you do, it might not be working. So we’ll show you how to hook up a projector to your speakers.
These steps are about pairing with your media devices, like your laptop, PC, DVD player, and so on. This method works with videos but not with audio. So, let’s show you how to do it.
Put the projector and speakers to sleep.
As we’ve already told you, turn off the projector and speakers first to keep them from breaking.
You can also work in comfort. Again, you can see that the projector and speakers are turned off.
JOIN PC AND DVD PLAYER
Now you need to find a connector that works with the speakers from your laptop, PC, and DVD player.
You will need a 3.5mm AUX cable for this. Now you push it directly from the PC so it works as audio out, line out, or headphones.
Check to see if the cable is connected right.
Does sound get to the speakers from a DVD, PC, etc.? You can also make sure that the inputs of the cable speakers match, since some don’t have 3.5mm connectors.
So, depending on the type of speakers, you may need an adapter. You choose the adapter based on the speakers.
JOIN THE SPEAKERS TO THE COMPUTER OR MEDIA PLAYER
Now you can check to see if your speakers have a stereo analog input or an audio input.
Then, put the 3.5mm AUX plug or adapter directly into the speakers. Match the right color cable to the right adapter.
Make sure to connect the yellow wires together and the red wires together. Also, if there is a different color, match the cables of the same color.
You only need to connect the cable to the amplifier or receiver, which is a simple task.
Test and Turn On
Now, turn on your computer, DVD player, speakers, and projector. The best thing to do would be to make sure that all of your devices are connected correctly.
You will only be able to hear sound from your speakers if your connection is working.
You should also think about whether a string is loose or a wire is in the wrong place. If either of these is the case, the speakers will either not make a sound or make a low sound, and maybe some speakers will be in the wrong place.
I heard voices, but not all of them. If everything works out, you can sit on your bed or couch and watch movies, TV shows, or play games.
Have fun with your home theater
No matter which method you choose, we hope it helps. You can now watch TV shows, play games, watch movies, and listen to serials on big screens and loud speakers.